Hoosier Profiles Inc
Worlds Finest Metal Shaping Tools
Adjusters & Lifters
Shown Above is an Adjusters Inside Components.
We Include a Mounting Plate(on Left) you can Weld to your Machine.
There are 3 tapped Holes in the Mount for the Adjuster to Attach to.
We Make 2 Size Adjusters.
For Domestic USA
Our Large one Shown Above is $437.00
Our Small Adjuster is $329.50
International Customers International shipping Only $47.95 Please Use These Buttons:
Large Adjuster International Shipping
Small Adjuster International Shipping
_______________________________________
Upper Wheel Lifters:
These Hold the Top Wheel on an English Wheeling Machine, they are Commonly Called "Upper Cradle", "Upper Saddle", "Upper Yoke", and some other names.
*Shown Above in the Picture the Lifter is Holding the Wheel.
These Lifters Bolt Directly to the Quill on the Adjuster with a Bolt we Include.
Our Lifters Can be Used Without Our Adjusters, we use a ½-13 Flathead Bolt to Attach it.
The Lifter is Disengaged by using the Spring Pin, then Rotating the Handle Raises the Upper Wheel ½" Above the Panel.
This is done without Cranking Your Adjusters Wheel, and makes removing a Part to be Checked
Large Lifters are $225.00 and are Available in 3 Sizes.
Large Lifters are Hold Wheels Up to 9" Diameter.
Domestic Customers Please Use these Buttons.
2" Wide
3" Wide
4" Wide
International Customers Please Use these Buttons.
2" Wide
3" Wide
4" Wide
________________________________________
Small Lifters are $215.00
They Hold Wheels up to 6.5" Diameter and are Only Available in 2" Wide
Domestic Shipping
International Shipping
*Shown Above in the Picture the Lifter is Holding the Wheel.
These Lifters Bolt Directly to the Quill on the Adjuster with a Bolt we Include.
Our Lifters Can be Used Without Our Adjusters, we use a ½-13 Flathead Bolt to Attach it.
The Lifter is Disengaged by using the Spring Pin, then Rotating the Handle Raises the Upper Wheel ½" Above the Panel.
This is done without Cranking Your Adjusters Wheel, and makes removing a Part to be Checked
Large Lifters are $225.00 and are Available in 3 Sizes.
Large Lifters are Hold Wheels Up to 9" Diameter.
Domestic Customers Please Use these Buttons.
2" Wide
3" Wide
4" Wide
International Customers Please Use these Buttons.
2" Wide
3" Wide
4" Wide
________________________________________
Small Lifters are $215.00
They Hold Wheels up to 6.5" Diameter and are Only Available in 2" Wide
Domestic Shipping
International Shipping
~~~~ON SPECIAL NOW~~~~
Hand Held Metal Shaping Hammer
$99.99 Plus Shipping
Domestic
International
Key Features:
1 Inch Pocket Machined on Both ends
4 UHMW Different Crown Radiused Heads included
2 Wedge Shaped Heads for Tuck Shrinking
10-24 locking Screws Secure the Dies in Place
Hickory 14 inch Handle included
Comes Assembled Now!
Head is Machined from 6061 Aluminum
Get Both Sides Custom Engraved for Only $35.00
Picture Shows many Custom Engravings.
We also Manufacture steel 1 inch Shank Dies that can Be used in this Hammer.
Using Steel Dies Creates Heavier Impacts requiring less brute force.
This Hammer Sold before for $138.00 and Only 3 UHMW Heads were Included.
We Buy from the Manufacture of the Handles, Aluminum, and the UHMW keeping the Cost as low as Possible!
Hundreds in Service since 1998
