Hoosier Profiles Inc
Worlds Finest Metal Shaping Tools
CP Air Hammer Die Set shown
Large 2.5" Flat Upper Die & Standard 1.5 Flat Upper Die
Lower Dies Include 1", 2", 4", 6", 8",12" (1.5" Heads)
Oversize Low Crown Dies 18", 24", 36"(2.0" Heads)
$399.99
<-------Domestic
<-------International
Large 2.5" Flat Upper Die & Standard 1.5 Flat Upper Die
Lower Dies Include 1", 2", 4", 6", 8",12" (1.5" Heads)
Oversize Low Crown Dies 18", 24", 36"(2.0" Heads)
$399.99
<-------Domestic
<-------International
Like all Our Products The Hammer Dies are Polished Mirror Smooth so Your Panels Achieve the Highest Quality Metal Finish.
All of our Dies have a 1.5 Over all Length, 3/4" Length Stems.
*We also Make Metric 20 mm Dies.
Hammer Dies are Available in 5 Sizes:
5/8" Shanks 1.500 overall length
3/4" Shanks
13/16" Shank also known as CP size
and 1" Shank
20mm (Metric Stem Length & Diameter is 20mm, and shaping head length is also 20mm.)
Upper Dies are Available for .401 Style Air Hammers
We Have a large or Small Upper Planishing Dies 1.5 , 1.0 size $49.99 With 1.470 Head Diameter.
& CP Hammers
Lower Planishing Hammer Die Sets: $225.00 ( 6) per Set
---------------------------------------------------------------
Upper Planishing Dies: 1.5 or 1.0 $225.00 (6) per Set
---------------------------------------------------------------
Hand Hammer Heads: 6 Heads
---------------------------------------------------------------
All of our Dies have a 1.5 Over all Length, 3/4" Length Stems.
*We also Make Metric 20 mm Dies.
Hammer Dies are Available in 5 Sizes:
5/8" Shanks 1.500 overall length
3/4" Shanks
13/16" Shank also known as CP size
and 1" Shank
20mm (Metric Stem Length & Diameter is 20mm, and shaping head length is also 20mm.)
Upper Dies are Available for .401 Style Air Hammers
We Have a large or Small Upper Planishing Dies 1.5 , 1.0 size $49.99 With 1.470 Head Diameter.
& CP Hammers
Lower Planishing Hammer Die Sets: $225.00 ( 6) per Set
---------------------------------------------------------------
Upper Planishing Dies: 1.5 or 1.0 $225.00 (6) per Set
---------------------------------------------------------------
Hand Hammer Heads: 6 Heads
---------------------------------------------------------------
~~~~ON SPECIAL NOW~~~~
Hand Held Metal Shaping Hammer
$99.99 Plus Shipping
Domestic
International
Key Features:
1 Inch Pocket Machined on Both ends
4 UHMW Different Crown Radiused Heads included
2 Wedge Shaped Heads for Tuck Shrinking
10-24 locking Screws Secure the Dies in Place
Hickory 14 inch Handle included
Comes Assembled Now!
Head is Machined from 6061 Aluminum
Get Both Sides Custom Engraved for Only $35.00
Picture Shows many Custom Engravings.
We also Manufacture steel 1 inch Shank Dies that can Be used in this Hammer.
Using Steel Dies Creates Heavier Impacts requiring less brute force.
This Hammer Sold before for $138.00 and Only 3 UHMW Heads were Included.
We Buy from the Manufacture of the Handles, Aluminum, and the UHMW keeping the Cost as low as Possible!
Hundreds in Service since 1998
